Quality standard: GB/T 25251-2010
1. Status in a container–No hard blocks but uniform after mixing
2. Appearance of the paint film–Iron-red flat paint film
3. Flow time (ISO 6# cup) (s) (≥)–45
4. Fineness (μm) (≤)–50
5. Drying schedule (h) (≤)–Touch dry: 5; hard dry: 24
6. Application property–Smooth application
7. Cross-cut test (level ) (≤)–1
8. Resistance to salted water (24h)–Normal
9. Adaptability to the finish–No bleeding
10. Grinding property (grinded with 320# waterproof abrasive paper for 15 times)–Easy grinding and no stickiness for abrasive paper
1. Supporting products: X-6 alkyd paint thinner, a mixed solvent including 200# solvent oil (or turpentine) and xylene, and finish such as alkyd enamel, amino baking finish and nitrocellulose enamel
2. Mixing ratio: Determine it according to the actual conditions.
3. Application method: spraying or brushing
4.Application instructions: Before application, clean the target metallic surface, remove the dirt such as rust and oil stains on it and grind it with abrasive paper to make it have metallic gloss. After spraying or brushing, make it dry in the air or bake it at 105±2℃(baking will result in better paint film).