1.Ground requirement:The concrete surface should be dry, clean, with a certain degree of roughness, no loose base, no oil stains and other obstacles to bond debris. If necessary, the surface treatment we can use sandblasting machine, ground sander, high – pressure water gun.

2.Ingredients: mix component A with A mixer before mixing ingredients. Add component B (curing agent) to component A according to the proportion of materials used. Mix with A low speed mixer (rotational speed: about 300-400 RPM) for 2-3 minutes until uniform.Pour the mixture into a clean container and stir a little more.(note: each dosage should be used up within the construction time limit.Remember not to mix in the original barrel after construction

3.Application method:Scraping, brushing and rolling

4.Material utilization amount：1.2kg/㎡/mm