Quality standard: HG/T 2454-2006 (II)
1. Color and appearance of the paint film-Compliant with the standard board and its color difference range, flat and smooth
2. Viscosity ((3#rod 12 speed/25℃) (mpa.s)-≥1200
3. Fineness (μm) -Sheen: ≤25; other: ≤40
4. Touch dry (h) -≤0.5
5. Hard dry (h) -≤24
6. Gloss (%)-Sheen: ≥90; other: negotiable
7. Pencil hardness-≥H
8. Flexibility (mm)-≤1
9. Adhesion performance (level) -≤1
1. Supporting products: S01-5 hardener and 5000 machinery paint thinner
2. Mixing ratio: weight ratio:
High-gloss paint: hardener: thinner: 1: 0.3~0.4: 0.5~0.8
Sub-gloss paint: hardener: thinner: 1: 0.2~0.3: 0.6~1.0
Ratio and viscosity of the paint can be properly adjusted according to the actual application conditions.
3. Application method: spraying (air compressor pressure: 0.2～0.4Mpa)
4. Application instructions: Remove oil, stains, rust and water on each workpiece to be sprayed. Do not use the air compressor or filter until the water flowing out of it is clear, so as to avoid pinholes on the film. Mix the paint of the proper amount thoroughly and spray it five to ten minutes later. Use it up as soon as possible (within six hours at most) to avoid a waste because of gelatinizing.
