1. State in container – No hard block and it is uniform after mixing.
2. Fineness，(μm) – ≤40
3. Solid content, (%) – ≥60
4. Drying time, (h) – Touch dry ≤1
Hard dry ≤24
5. Bending test, (mm) – ≤1
6. Impact resistance, (cm) – ≥50
7. Cross-cut test, (grade) – ≤1
8. Water resistance (24 h) – Normal
1.Application method: Brush coating, roller coating or air spraying.
2.Application instructions:
-Coating equipment should be kept clean, dry and non-pollution, not mixed with oil, debris, organic solvents, paint blocks etc.
– Before painting, the paint should be mixed evenly. mix A and B evenly according to the proportion of product marking, then add appropriate amount of water, stir evenly and then use.
-One spray should not be too thick. The thickness of wet film should not exceed 100μm.
-It is strictly prohibited to mix with other coatings and organic solvents.
-Please remember cover the unused paint and keep it tightly.
1.Product can be stored in ventilated, cool, dry place, prevent rain and direct sunlight;
2.The storage period of the product is 6 months. If it exceeds the period, it can still be used after passing the inspection .
